Klipsch subwoofers are recognized for their amazing sound and powerful bass. Like every piece of equipment out there, they can have problems with time. In this post, we will go through some of the common problems with the Klipsch Subwoofers and offer the best solutions so that your subwoofer works like new again.
Check Out: Yamaha Subwoofer Troubleshooting
Individual Issues and Solutions On Klipsch Subwoofers
No Sound or Low Output
Important Factors:
The biggest issue that most people seem to have is low volume output, or no sound at all coming out, when everything seems to be connected and functional.
Towards this problem, some of the potential causes may be no signal in the receiver, wrong configuration settings at the component level, loosely connected or failed parts, and others.
Solution to the Issue:
Verify the Power: Check whether the subwoofer is connected to the power outlet and if the power indicator light is shining. If it is not, there may be an issue with the subwoofer getting power.
Check Connections: Check that every single wire is securely fastened including power, speaker relevant, and others along those lines. Change any broken wires that happen to be torn.
Setting Adjustments: You need to change the settings on the receiver, and on the sub itself in order to be sent signal to the sub. Verify that the crossover frequency along with the volume dials are correct.
Subwoofer Producing Distorted Sound
Probable Causes:
The two best explanations for muffled or distorted sounds are that the subwoofer is overdriven and the amplifier is having difficulty delivering power to the speaker.
Another explanation could be erroneous connections, either faulty wiring that gives poor signals due to wiring faults.
Solution:
Check the Amplifier: If power is showing up with the amplifier in the overload stage, it leads to distortion; thus, try lowering the output. Check if reducing the amplifier and subwoofers settings of volume and gain improves the distortion.
Confirm Wiring: Check all speaker cables for fraying, loose, or connecting breaks. Ensure that the connections are clean and tight.
Confirm the Source: It is worth noting that sometimes the source itself is the avenue to blame for such concerns; testing the subwoofer and playing a set of files could be an effective remedy towards identifying the concern.
Subwoofer Not Powering Up
Probable Causes:
Not powering up could result from problems such as the internal parts of the sub-woofer and fuse power supply. Blown power supply also could play internal component issues. Specific to the brand is like Klipsch.
Solution:
Inspect the Fuse: One of the more commonplace issues causing a subwoofer to not turn on is a blown fuse. Check the user guide to see where the fuse is located. If it is blown, make sure to replace it with one of equal rating.
Evaluate the Power Supply: Ensure that the outlet you are using for the power is indeed functional. Try plugging in another device to the power source.
Internal Component Inspection: If the fuse is good and the power outlet seems fine, but the subwoofer still does not turn on, the issue might be with the internal components. At this point, it is best to reach out to Klipsch customer help or a technical expert.
Hum or Buzzing Subwoofer Noise
Ground loop mixing or poor cable connections are often attributed to the humming or buzzing sound.
Humming and buzzing sounds are usually caused by Electric Devices emitting Electromagnetic Interference.
Solution:
Install a Ground Loop Isolator: If so, try placing a ground loop isolator between the sub and receiver and enjoy your multi-device setup with no added hum.
Check the Cables: Fix poorly designed or broken wires because they are causing an issue with the sound system. Also, make sure that all the wires are insulated, so they don’t pick up signals from other electrical components.
Reposition the Subwoofer: Attempt to place the subwoofer in another area of the room. Moving it far from other electronic equipment can reduce buzzing or humming sounds generated by electromagnetic interference.
Subwoofer Volume Too Low
Possible Causes:
If insufficient volume is created from the subwoofer, the likely culprits are: volume control settings, the device used to set the level of audio frequency being passed, or the output signal coming from the preamplifier.
Solution:
Examine the Volume Control: Double check that the volume dial on the subwoofer and the receiver is set high enough.
Modify the Crossover: Ensure that the subwoofer crossover frequency is set correctly. A crossover set too low will restrict the volume of low frequencies from the subwoofer. It is typically from 80Hz to 120Hz, depending on the speakers used. Typically, the best value is between 80-120Hz.
Confirm the Signal: If the subwoofer stays silent, try replacing the devices connected to the subwoofer to rule the possibility of wrong signals as the problem.
Auto-On Feature Not Working On Subwoofer
Potential Problems:
Some Klipsch subwoofers have an auto-on feature that activates the power when something is playing. Problems could stem from the settings or a faulty auto-on circuit.
Steps Towards Resolution:
Auto feature settings can be adjusted. Also, some models have an auto switch that can be toggled on. Check to see if it is set in the “off” position. If so, the subwoofer cannot turn on automatically. So, confirm the switch position to be correct.
Test to check if the Switch Auto Function Works: If the feature doesn’t work, check to see if an audio signal is coming through. When the audio signal is weak and not consistent, the feature is unlikely to work.
Set the subwoofer to manual operation: In the event the subwoofer continues failing at auto turn on, switch the power button to turn it to manual operation.
May Like: Sony Subwoofer Troubleshooting
Know When Professional Assistance Is Needed:
After going through all the relevant solutions and still having problems, in this case, with a Klipsch Subwoofer, it is best to get an expert. Troubleshooting the complicated wiring, amplifier, or internal pieces usually requires a technician.
Concluding Remarks
We all know that Klipsch subwoofers provides great bass and efficiency, but similar to other audio equipment, there might be issues along the way. Many of the problems that can be encountered can be resolved in a short amount of time if the troubleshooting methods given in the prior sections are applied. Also, don’t forget that Klipsch customer service is just one call away if you need additional help.
